Direct sampling RTL-SDR TECHNICAL SPECIFICATIONS
Fully assembled and ready to use
Uses RTL2832U+R820T2 chip set.
[R820T2 tuner has slightly better sensitivity than the R820T and also works better at frequencies around 1.5 GHz. 100% compatible with software for the older R820T.]
100KHz to 1766MHz, operating frequency
1 PPM temperature compensated oscillator (TCXO)
[Accurate tuning and almost zero temperature drift (2 PPM initial offset, 1 PPM temperature drift)]
Covers all HF amateur bands
Covers VHF & UHF bands from 24-1766MHz
Up to 3.2 M Sample rate. (~2.8 MHz stable)
Receiver modes AM, NFM, FM, DSB, USB, LSB and CW
HF Shortwave Q branch direct sampling
Note: depends upon the SDR software used with the receiver
8-bit ADC giving ~50 dB dynamic range
50 Ohm input impedance
SMA golden antenna connectors It is also more durable and has lower insertion losses
Aluminum enclosure screened panels
Small size board
Independent antenna inputs for Shortwave and VHF
USB computer connection (mini usb) Powered by common USB
All specifications subject to change without notice
Receiving LF/MF/HF (0 - 30 MHz)
The HF band antenna must be connected to the Ant input port.
Signal receiving HF band needs to meet the HF Antennas such as Long Wire, Random Wire, Dipole etc..
To have a good effect it needs matching antenna.
The program of SDR # with RTL configured to direct sampling of the signal Q, as shown in the following figure. (Left Figure)
Operation on VHF and UP:
The UV band antenna must be connected to the Ant input port
By default the RTL-SDR’s gain is set to zero. Increase this gain by moving the RF Gain slider up, or by turning on Tuner AGC. (Right Figure)
Direct sampling settings for HDSDR
Click on the ExtIO button. Receiving LF/MF/HF (0-30 MHz) (Left Figure)
Operation on VHF and UP. (Right Figure)
A good guide to learning how to use SDRSharp and what all the options do can be on the follow website found. (CLICK)
THE BIG LIST OF RTL-SDR SUPPORTED SOFTWARE
1x 100Khz-1.7GHz Full Band UV HF RTL SDR+Upconverter USB Tuner Receiver
1x Testing Telescopic Antenna
1x USB Cable
1 Year and 6 months Manufacturer's Warranty.
• Radioddity's limited warranty applies to all BRAND NEW items sold by radioddity.com and other authorized dealers.
• This warranty is non-transferable and proof of purchase from us or an authorized dealer is required for warranty service.
What Does This Limited Warranty Cover?
We warrant that the Products are free from defects in materials and workmanship under normal use and use in accordance with the respective Product user manual, during the Warranty Period. Please refer to the Instructions inside each package for a description of proper use and care of the unit.
What Does This Limited Warranty Not Cover?
This limited warranty does not cover damages directly or indirectly arising or resulting from or during:
(1) accident, misuse, abuse, vandalism or acts of God (including lightning and other weather conditions)
(2) use with another product or other damage or loss suffered by the use or combination of any other item
(3) improper or inadequate maintenance
(4) repairs by an unauthorized service technician
(5) normal wear and tear
If you are satisfied with our products and service, please kindly leave us a positive product review. Any problem, be free to contact us firstname.lastname@example.org
We strive to answer all emails as quickly as possible, but due to high email volume, it may take time for us to reply. Thanks in advance for your patience!